掺锗提高VO2薄膜的相变温度机理研究

二氧化钒(VO₂)作为一种长久以来备受关注的新型可逆相变材料,发展潜力巨大,其相变温度(T_MIT)的调控一直是研究热点。本文主要利用锗离子作为掺杂离子探索其对VO₂薄膜T_MIT的影响,并尝试解释其内部作用机理。在约1 cm²大小抛光的氧化铝薄片上沉积了一系列含不同比例锗离子VO₂薄膜。研究发现锗离子作为掺杂离子确实有利于T_MIT的提高(本课题T_MIT最大可达84.7 ℃)。T_MIT提高的主要原因是锗离子的引入能够强化单斜态V-V二聚体的稳定性,进而增强单斜态的稳定性,使得低温单斜态向四方金红石态转变更加困难。     

Vertex correction and conductivity in 2D Dirac-like systems with non-conserving spin disorder

We determine the classical diffusion of two dimensional Dirac-like quasiparticles, in the presence of conserving spin disorder (scattering off electric impurities) and non-conserving spin disorder (scattering off magnetic impurities). We use the Kubo formula for the conductivity tensor and employ diagrammatic perturbation theory to calculate the vertex correction and the renormalisation of the current operator for both electric and magnetic scattering. Scattering off electric impurities is isotropic and the current operator renormalised to two times the bare current operator irrespective of the direction of the dynamics, as usual for Dirac-like fermions. For magnetic scattering the renormalisation of the current operator depends on the direction of the dynamics and on the polarisation of the magnetic impurities, making the system anisotropic. We calculate the anisotropic magnetoresistance (AMR) and analyse it as a function of the ratio of the strength of the electric to the magnetic scattering potentials, for short range Gaussian correlation.     

高精度半导体激光打标机F-θ镜头设计

为保证半导体激光打标机F-θ镜头的扫描质量，实现系统像高与扫描角的线性变化，需对F-θ镜头给予一定的畸变量，并使其满足等晕条件。分析F-θ镜头工作原理及像差要求，根据1 064 nm半导体激光打标机的光源成像要求选择合适的玻璃材料，合理分配每片透镜的光焦度，以保证等晕成像；根据F-θ镜头线性成像要求，计算系统总畸变量为1.6%，系统总畸变量为系统的实际桶形畸变与相对畸变量之和；在光学系统优化设计时，引入这两项优化参数，优化过程中观察系统成像变化情况。设计结果表明:系统MTF曲线接近衍射极限，F-θ镜头相对畸变小于0.36%，各视场均方根半径均小于艾里斑直径，并且整个系统70%的能量集中在直径为16 μm的圆内，系统总畸变量为1.58%，满足设计指标要求。     

Nehari函数族的偏差性质与拟共形延拓

研究某一Nehari函数族的偏差性质,得到这类函数族的H?lder连续性及若干偏差定理,同时讨论了该函数类的拟共形延拓问题,并给出拟共形延拓的复伸张估计,推广了杨宗信等人相应的结论.     

Ni单原子催化剂表面CO2电还原动力学的电化学谱学解析

针对Ni单原子催化剂表面的CO₂电还原反应(CO₂RR), 提出了以Ni为活性位点的“单中心”机理以及同时借助Ni位点还原和碳氮锚定位水解的“双功能”机理. 依据稳态极化的实验结果, 开展了CO₂RR的动力学解析与模型参数的敏感性分析; 借助暂态模型方程, 分别获取可表达CO₂RR线性与非线性频响特征的电化学阻抗谱(EIS)与总谐波失真(THD)谱. 研究结果表明, CO₂的溶解分压对CO₂RR活性影响最显著. 若CO₂RR遵循“单中心”机理, Ni位点COOH_ads的形成为速率控制步骤; 但若为“双功能”机理, 碳氮锚定位的水解与Ni位点的CO_2,ads还原同为速率控制步骤. EIS理论上可用于区分CO₂RR的“单中心”机理与“双功能”机理; 与之相比, THD谱在CO₂RR的机理识别中并无优势.     

External electric field effect on electronic properties and charge transfer in CoI2/NiI2 spinterface

Electronic structure and spin-related properties of CoI₂/NiI₂ heterostructure were studied by means of density functional theory. It was shown that the electronic structure at the Fermi level can be characterized by a band gap. The effect of the external electric field on charge transfer and electronic properties of the CoI₂/NiI₂ interface was investigated, and it was found that band gap width depends on the strength of the applied electric field, switching its nature from semiconducting to a half-metallic one. An easy control of the electronic properties and promising spin-polarized nature of the CoI₂/NiI₂ spinterface allows the heterostructure to be used in spin-related applications.     

Comparison study of exchange-correlation functionals on prediction of ground states and structural properties

Despite significant advances in first-principles calculation methods, there is no single exchange-correlation functional which predicts the ground state of materials without an error yet. We investigated how accurately ground states of binary semiconductors are described using 16 exchange-correlation functionals (with or without van der Waals corrections). LDA, PBEsol, SCAN (with or without rVV10 correction), and PBE with D3 van der Waals correction (zero or Becke-Johnson damping) show good predicting power. The lattice constants of stable phases were slightly better described by SCAN, PBEsol, PBE+D3 (Becke-Johnson damping), and MS2. We also propose a set of functionals to double-check the stability of new materials based on the majority vote.     

电感耦合等离子体质谱(ICP-MS)法测定地质样品中Cu和Zn的干扰研究

电感耦合等离子体质谱法（ICP-MS）标准模式测定地质样品中Cu和Zn时,样品溶液中Ti在高温下易形成TiO+和 TiOH+离子产生重叠干扰,使测定值偏离真值而影响测定结果。采用氢氟酸-高氯酸-硝酸消解、王水复溶样品,通过多级在线校正46Ti16O+,消除TiO+和 TiOH+离子重叠干扰,研究了单质Ti与46Ti16O+、质荷比63、64、65、66离子间存在的关系,建立了一种电感耦合等离子体质谱(ICP-MS)法测定地质样品中Cu和Zn的分析方法。实验结果表明：单质Ti对Cu和Zn产生的干扰值与其质量浓度呈非简单的正相关性,TiO+产生的干扰离子质荷比65离子强度比63高,质荷比64离子强度比66 高; 46Ti16O+对质荷比63、66离子干扰增量值与单质Ti质量浓度变化无关;62Ni对46Ti16O+产生同量异位素重叠干扰,测定值须校正来自62Ni的贡献。ICP-MS测定地质样品中Cu和Zn时应选择测量同位素63Cu和66Zn,其检出限（n=7）分别为0.35 μg/g和0.63 μg/g。经有证标准物质验证,测定值与认定值吻合,准确度（RE）<8.6%,精密度（RSD,n=6）<5%。本方法适用于ICP-MS测定地质样品中Cu和Zn的质谱干扰消除,满足地质分析要求。     

Improving the impact property and heat‐resistance of PLA/PC blends through coupling molecular chains at the interface

The influences of both the molecular structure and the melt viscosity differences between Poly(lactic acid) (PLA) and polycarbonate (PC) on the interpenetration of molecular chains at the interface were investigated by comparing the dynamic mechanical properties and morphologies of the as‐prepared PLA/PC solution‐casting blends with those of their corresponding annealed (180°C, 8 h) samples or PLA/PC melt blends. Additionally, two chain extenders containing epoxy groups (ADR and TGDDM) were used to improve the interfacial strength. Subsequently, the interpenetration of PLA and PC molecular chains at the interface was also surveyed. Finally, the effects of the morphology formed by after adding ADR or TGDDM on the impact property, and heat resistance were discussed. The results showed that there was no interpenetration of molecular chains at the interface in PLA/PC melt blends because of the serious hindrance of the molecular structure and the melt viscosity differences. Although the interfacial strength achieved significant increase after adding ADR or TGDDM, the increase of the interfacial strength should be caused by the connection of ADR or TGDDM molecules with PLA and PC molecules at the interface through chemical bonds rather than the entanglements of PLA and PC molecular chains because of no interpenetration of PLA and PC molecular chains at the interface. Thus, the morphology formed after adding ADR or TGDDM is still the type of complete phase separation, which may be the most suitable morphology for achieving high impact and heat resistance PLA/PC blends because these two properties strongly depend on the crystallinity of PLA phase. Copyright © 2015 John Wiley & Sons, Ltd.     

Calibration transfer employing univariate correction and robust regression

This paper proposes a new method for calibration transfer, which was specifically designed to work with isolated variables, rather than the full spectrum or spectral windows. For this purpose, a univariate procedure is initially employed to correct the spectral measurements of the secondary instrument, given a set of transfer samples. A robust regression technique is then used to obtain a model with low sensitivity with respect to the univariate correction residuals. The proposed method is employed in two case studies involving near infrared spectrometric determination of specific mass, research octane number and naphthenes in gasoline, and moisture and oil in corn. In both cases, better calibration transfer results were obtained in comparison with piecewise direct standardization (PDS). The proposed method should be of a particular value for use with application-targeted instruments that monitor only a small set of spectral variables.